AISI 304 MSS SP-114 CL150 2½”Stainless Steel Cast Threaded Straight Cross

AISI 304 MSS SP-114 CL150 2½” Stainless Steel Cast Threaded Straight Cross

Product Information

A Cast Threaded Straight Cross is a type of pipe fitting that allows for a four-way intersection of pipes in plumbing and piping systems.

A Cast Threaded Straight Cross is a crucial component in plumbing and piping systems, enabling the creation of a four-way intersection for pipes in a straight line for various applications.

Straight cross is a four-way fitting used to make double perpendicular connections to the pipe. It resembles a crossroad. Lines that connect to the main run of pipe are known as “branches”. The main run of pipe is often called the “header”. The word “straight” denotes that all four outlets are the same pipe size.

· Function: The threaded straight cross is designed to provide a four-way intersection for pipes in a plumbing system.

· Design: It typically features female threads on all four ends, allowing for the connection of pipes in a straight line.

· Material: Commonly made from materials like brass, stainless steel, or other metals for durability and corrosion resistance.

· Installation: Each end of the cross is screwed onto corresponding male-threaded pipes to create a cross junction.

Standard & Materials:AISI 304/L

The SAE/ANSI 304 (AISI 304) is the most commonly available and used type of stainless steel. It is also referred to as 18/8 stainless steel, A2 stainless steel (as per the ISO 3506), or 304S15 (as per the British Standard). This is an austenitic chromium-nickel alloy which practically means that it has a very high corrosion resistance. It is also nonmagnetic and can’t be hardened through heat treatment. As AISI 304 can withstand extremely corrosive environments and can be shaped, machined and welded relatively easy, it is very popular for a wide range of applications.

AISI 304/L Chemical Composition (%)

AISI 304/L Mechanical Properties

SP-114 Dimensions of Class 150 Cast Threaded 45/90 Degree Elbows, Tees and Crosses. (in inches)

NOTES:

1. Patterns shall be designed to produce castings of metal thickness given in the Table. Metal thickness at no point shall be less than 90% of values given in the Table.
2. The length of thread may extend beyond the width of band. However, minimum metal thickness (G) must be maintained at the end of the thread.
3. Ribs are permitted as per Section 9. The applicable “external” broken lines in the drawings above indicate where ribs are allowed.