Home
>
PRODUCTS
>
Stainless Steel Cast Fittings
>
|
| Place of Origin | CHINA |
| Brand Name | KASUGAI |
| Certification | ISO-9001; PED; AD 2000 |
| Model Number | AISI 304 MSS SP-114 CL150 45DEG 2½″ Cast Threaded Elbow |
| Document | Product Brochure PDF |
AISI 304 MSS SP-114 CL150 45DEG 2½″ Stainless Steel Cast Threaded Elbow
Product Information
| Product Name | AISI 304 MSS SP-114 CL150 45DEG 2½″ Stainless Steel Cast Threaded Elbow |
| Thread Types | ASME B1.20.1(NPT), BS 21 (NSPT), DIN2999/259 |
| Dimensions | MSS SP-114 |
| Size Range | 1/8” to 4” |
| Pressure Class | 150 |
| Materials | AISI 304/L |
Standard & Materials: AISI 304L
The SAE/ANSI 304 (AISI 304) is the most commonly available and used type of stainless steel. It is also referred to as 18/8 stainless steel, A2 stainless steel (as per the ISO 3506), or 304S15 (as per the British Standard). This is an austenitic chromium-nickel alloy which practically means that it has a very high corrosion resistance. It is also nonmagnetic and can’t be hardened through heat treatment. As AISI 304 can withstand extremely corrosive environments and can be shaped, machined and welded relatively easy, it is very popular for a wide range of applications.
AISI 304/L Chemical Composition (%)
| Grade | C, max | Cr | Mn, max | Ni | P, max | S, max | Si, max |
| AISI 304 | 0.08 | 18~20 | 2 | 8~10.5 | 0.045 | 0.03 | 1 |
| AISI 304L | 0.03 | 18~20 | 2 | 8~12 | 0.045 | 0.03 | 1 |
AISI 304/L Mechanical Properties
| Mechanical Properties | 304 | 304L |
| Hardness, Knoop | 138 | 158 |
| Hardness, Rockwell B | 70 | 82 |
| Hardness, Vickers | 129 | 159 |
| Tensile Strength, Ultimate | 505 MPa | 564 MPa |
| Tensile Strength, Yield | 215 MPa | 210 MPa |
| Elongation at Break | 70% | 58% |
| Modulus of Elasticity | 193~200 GPa | 193~200 GPa |
| Charpy Impact | 325 J | 216J |
MSS SP-114 Dimensions of 45 Degree Cast Threaded 90°/45° Elbows, Tees and Crosses (inches)
| NPS | Center-to-End Elbows, Tees & Crosses | Center-to-End 45° Elbows | Length of Thread(b) (min.) | Width of Band (min.) | Metal Thickness(a) | Outside Dia. of Band (min.) |
| A | C | B | E | G | H | |
| ⅛ | 0.81 | 0.69 | 0.25 | 0.20 | 0.09 | 0.75 |
| ¼ | 0.81 | 0.69 | 0.32 | 0.20 | 0.09 | 0.84 |
| ⅜ | 0.93 | 0.81 | 0.36 | 0.21 | 0.10 | 1.01 |
| ½ | 1.12 | 0.87 | 0.43 | 0.25 | 0.10 | 1.20 |
| ¾ | 1.31 | 1.00 | 0.50 | 0.27 | 0.12 | 1.46 |
| 1 | 1.50 | 1.12 | 0.58 | 0.30 | 0.13 | 1.77 |
| 1¼ | 1.75 | 1.31 | 0.67 | 0.34 | 0.14 | 2.15 |
| 1½ | 1.93 | 1.43 | 0.70 | 0.37 | 0.15 | 2.43 |
| 2 | 2.25 | 1.68 | 0.75 | 0.42 | 0.17 | 2.96 |
| 2½ | 2.68 | 1.93 | 0.92 | 0.48 | 0.2 | 3.31 |
| 3 | 3.06 | 2.18 | 0.98 | 0.55 | 0.23 | 4.00 |
| 4 | 3.81 | 2.62 | 1.08 | 0.66 | 0.26 | 5.06 |
NOTES:
(a) Patterns shall be designed to produce castings of metal thickness given in the Table. Metal thickness at no point shall be less than 90% of values given in the Table.
(b) The length of thread may extend beyond the width of band. However, minimum metal thickness (G) must be maintained at the end of the thread.
Contact Us at Any Time
