CASTING SCREW CROSS Stainless Steel High Pressure Fittings

CASTING SCREW CROSS Stainless Steel High Pressure Fittings

Product Information

A "casting screw cross" typically refers to a type of pipe fitting that allows for a 4-way intersection in a piping system. It is designed to connect four pipes at right angles to each other. When specified as "Stainless Steel Casting Screw Cross," it indicates that the fitting is made of stainless steel material, known for its corrosion resistance and durability.

Stainless Steel Casting Screw Cross fittings are constructed from stainless steel, which provides excellent corrosion resistance and durability, making them suitable for various applications.

Applications:

Stainless Steel Casting Screw Cross fittings are used in piping systems where a 4-way intersection is required. They are commonly employed in plumbing, industrial, and commercial applications.

Standards & Materials: ASTM A403

ASTM A403 Stainless Steel Pipe Fittings refers to the material of forged and rolled austenitic stainless fittings for pressure pipes. Common grades are WP304/L, WP316/L. They can be used into many fields as engineering industry, energy conversion plants etc.

ASTM A403 Chemical Compositions (%)

Note:

• Where a ellipsis(﹍)appears in the table, there is no requirement and the element need to be analyzed for or reported
• The method of analysis for nitrogen shall be a matter of agreement between the purchaser and manufacturer
• Columbium 0.10-0.30%; Vanadium 0.10-0.30%.
• For small diameter or thin walls, or both, where many drawing passes are required, a carbon maximum of 0.04% is necessary in grades TP304L and TP316L. Small outside diameter tubes are defined as those less than 0.500in.(23.7mm) in outside diameter and light wall tubes as those less than 0.049in.(1.24mm) in average wall thickness

Dimensions of ASME B16.11 Threaded (THD) Cross (mm)

The drawing of ASME B16.11 forged tee with threaded (THD) ends. A: center-to-end of cross; H: outside diameter of band; G: minimum wall thickness; B: minimum length of perfect thread; L₂: effective length of external thread.