Home
>
PRODUCTS
>
Stainless Steel High Pressure Fittings
>
|
| Place of Origin | China |
| Brand Name | Kasugai |
| Model Number | ASTM A182 F316 ASME B16.11 High Pressure Stainless Steel Forged Hex Head Bushing |
| Document | Product Brochure PDF |
ASTM A182 F316 ASME B16.11 High Pressure Stainless Steel Forged Hex Head Bushing
Product Information
| Product Name | ASTM A182 F316 ASME B16.11 High Pressure Stainless Steel Forged Hex Head Bushing |
| Thread Types | ASME B1.20.1(NPT) |
| Dimensions | ASME B16.11 |
| Size Range | 1/8” to 4” |
| Pressure Class | Class 3000 6000 9000 |
| Standards | ASTM A182 F316 |
Standards & Materials: ASTM A182 F316/F316L
Stainless steel 316/ 316L flanges have enhanced resistance to pitting corrosion in chloride environments due to the addition of molybdenum. The letter “L” denotes low carbon content. According to ASME B16.5 and ASME B16.47, SS 316/ 316L flanges may be made from forgings of ASTM A182 Grade F316 or F316L, castings of ASTM A351 Grades CF8M or CF3M, and plates of ASTM A240 Grades 316 or 316L.
SS 316/ 316L flanges can be furnished in diverse types such as welding neck, slip on, blind, socket welding, lap joint, threaded, and reducing, etc. Flanges of ASME B16.5 may be provided in sizes 1/2″ through 24″ in Class 150, 300, 400, 600, 900, 1500, 2500. Flanges of ASME B16.47 Series A may be provided in sizes 26″through 60″in Class 150, 300, 400, 600, 900; while flanges of ASME B16.47 Series B may be provided in sizes 26″ through 60 in Class 75, 150, 300, 400, 600, 900
ASTM A182 F316/F316L Chemical Composition (%)
| Grade | C, max | Mn, max | P, max | S, max | Si, max | Ni | Cr | Mo | N, max |
| F316 | 0.08 | 2.00 | 0.045 | 0.030 | 1.00 | 10.0~14.0 | 16.0~18.0 | 2.00~3.00 | 0.10 |
| F316L | 0.03 | 2.00 | 0.045 | 0.030 | 1.00 | 10.0~15.0 | 16.0~18.0 | 2.00~3.00 | 0.10 |
ASTM A182 F316/F316L Mechanical Properties
| Grade |
Tensile Strength, min (MPa) |
Yield Strength, min (MPa) |
Elongation in 2inchs, min (%) |
Reduction of Area, min (%) |
| F316 | 515 | 205 | 30 | 50 |
| F316L | 485 | 170 | 30 | 50 |
Dimensions of ASME B16.11 Forged Hex Head Bushing(1)
| NPS | Length (min.) | Nominal Width Flats(2) | Hex Height (min.) |
| A | F | H | |
| ⅛ | 10 | 11.11 | — |
| ¼ | 11 | 15.88 | 3 |
| ⅜ | 13 | 17.46 | 4 |
| ½ | 14 | 22.23 | 5 |
| ¾ | 16 | 26.99 | 6 |
| 1 | 19 | 34.93 | 6 |
| 1¼ | 21 | 44.45 | 7 |
| 1½ | 21 | 50.80 | 8 |
| 2 | 22 | 63.50 | 9 |
| 2½ | 27 | 76.20 | 10 |
| 3 | 28 | 88.90 | 10 |
| 4 | 32 | 117.48 | 13 |
GENERAL NOTE: Dimensions are in millimeters.
NOTES:
(1) Cautionary Note Regarding Hex Bushings: Hex head bushings of one-size reduction should not be used in services where they might be subject to harmful loads and forces other than internal pressures.
(2) Manufacturer’s applied tolerance shall ensure dimension will fit U.S. Customary tooling
Contact Us at Any Time
