Home
>
PRODUCTS
>
Stainless Steel High Pressure Fittings
>
|
| Place of Origin | China |
| Brand Name | Kasugai |
| Model Number | ASTM A182 SS304 ASME B16.11 High Pressure Stainless Steel Forged Socket Weld (SW) End Cap |
| Document | Product Brochure PDF |
ASTM A182 SS304 ASME B16.11 High Pressure Stainless Steel Forged Socket Weld (SW) End Cap
Product Information
| Product Name | ASTM A182 SS304 ASME B16.11 High Pressure Stainless Steel Forged Socket Weld (SW) End Cap |
| Size Range | 1/8” to 4” |
| Wall Thickness | Sch80 XS Sch160 XXS |
| Standards | ASTM A182 |
| Type | Socket Weld(SW) End Cap |
| Dimensions | ASME B16.11 |
The Socket Weld Cap is a piece of pipe fitting that is used usually to seal the open end of a pipe. The ASME B16.11 cap sizes range up to 4 inches in diameter. The caps are used commonly in small size pipes. The socket weld cap dimensions vary according to the pipe system they are used in. The socket weld pipe cap has a socket on the opening end. The closing end is closed so that the socket can cover the opening of the pipe and seal it completely and tightly. The socket weld end cap can differ in size and type
Standards & Materials: ASTM A182 F304
ASTM A182 F304 is a forging material specification for 304 grade stainless steel and is used for manufacturing bare forgings or gorged and machined products for applications involving high temperature service.
ASTM A182 F304 Chemical Composition (%)
| Grade | C, max | Mn, max | P, max | S, max | Si, max | Ni | Cr | N |
| F304 | 0.08 | 2.00 | 0.045 | 0.030 | 1.00 | 8.0~11.0 | 18.0~20.0· | 0.10 |
ASTM A182 F304 Mechanical Properties
| Grade |
Tensile Strength, min (MPa) |
Yield Strength, min (MPa) |
Elongation in 2inches, min (%) |
Reduction of Area, min (%) |
Hardness (HBW) |
| F304 | 515 | 205 | 30 | 50 | ﹍ |
ASME B16.11 Dimensions of Socket Weld End Cap (mm)
| NPS | Socket Bore Dia.(1).,B | Socket Wall Thickness(2) , C (min.) | Depth of SW, J (min.) | End Wall Thickness, K (min.) | ||||
| 3000 | 6000 | 9000 | 3000 | 6000 | 9000 | |||
| ⅛ |
11.2 10.8 |
3.18 | 3.43 | — | 9.5 | 4.8 | 6.4 | — |
| ¼ |
14.6 14.2 |
3.30 | 4.01 | — | 9.5 | 4.8 | 6.4 | — |
| ⅜ |
18.0 17.6 |
3.50 | 4.37 | — | 9.5 | 4.8 | 6.4 | — |
| ½ |
22.2 21.8 |
4.09 | 5.18 | 8.18 | 9.5 | 6.4 | 7.9 | 11.2 |
| ¾ |
27.6 27.2 |
4.27 | 6.04 | 8.56 | 12.5 | 6.4 | 7.9 | 12.7 |
| 1 |
34.3 33.9 |
4.98 | 6.93 | 9.96 | 12.5 | 9.6 | 11.2 | 14.2 |
| 1¼ |
43.1 42.7 |
5.28 | 7.80 | 10.62 | 12.5 | 9.6 | 11.2 | 14.2 |
| 1½ |
49.2 48.8 |
5.54 | 9.50 | 11.12 | 12.5 | 11.2 | 12.7 | 15.7 |
| 2 |
61.7 61.2 |
6.04 | — | 12.12 | 16.0 | 12.7 | 15.7 | 19.0 |
| 2½ |
74.4 73.9 |
7.67 | — | — | 16.0 | 15.7 | 19.0 | — |
| 3 |
90.3 89.8 |
8.30 | — | — | 16.0 | 19.0 | 22.4 | — |
| 4 | 115.7 | 9.35 | — | — | 16.0 | 22.4 | 28.4 | — |
General Note: Dimensions are in millimeters.
Notes:
(1) Upper and Lower values for each size are the respective maximum and minimum dimensions.
(2) The minimum values are permitted in localized areas.
Contact Us at Any Time
