Home
>
PRODUCTS
>
Copper Nickel Flanges
>
|
| Place of Origin | China |
| Brand Name | Kasugai |
| Certification | ISO PED AD2000 |
| Model Number | C70600 ANSI B16.5 Class 150 TR |
| Document | Product Brochure PDF |
ASTM B151 C70600 ANSI B16.5 Class 150 Copper Nickel Threaded (TR) Flanges
Product Information
| Product Name | ASTM B151 C70600 ANSI B16.5 Class 150 Copper Nickel Threaded (TR) Flanges |
| Size Range | 1/2’ to 24” |
| Pressure Class | 150, 300, 400, 600, 900, 1500, 2500, |
| Thickness | Sch10S to Sch160 |
| Standards | ASME/ANSI B16.5/B16.47, JIS B2220 |
| Type | Threaded (TR) |
| Dimensions | ASME/ANSI B16.5/B16.47, Custom Drawings |
| Origin | China |
Standards & Materials: ASTM B151
Chemical Composition of ASTM B151 (%)
| UNS | C | Ni | Pb | Fe | Mn | Zn | P | S | C |
| C70600 | Remainder | 9.0-11.0 | 0.05 | 1.0-1.8 | 1.0 | 1.0 | |||
| C71500 | Remainder | 29.0-33.0 | 0.05 | 0.40-1.0 | 1.0 | 1.0 |
Mechanical Properties of ASTM B151 C70600
| Temper Code | Dia. or Distance Between Parallel Surfaces (mm) | Tensile Strength, min (MPa) | Yield Strength at 0.5%Extension Under Load, min (MPa) | Elongation in 4xDia or Thickness of Specimen, min (%) | |
| O60, M30 | Round, Hex and Octagonal rods and square bars | All sizes | 260 | 105 | 30 |
| H04 | Round, Hex and Octagonal rods and square bars | Up to 9.5, incl | 415 | 260 | 10 |
| Over 9.5 to 25, incl | 345 | 205 | 15 | ||
| Over 25 to 80, incl | 275 | 105 | 30 | ||
| Over 80 to 125, incl | 260 | 105 | 20 | ||
| O60 | Rectangular bars and shapes | All sizes | 260 | 105 | 30 |
| H04 | Rectangular bars | Up to 9.5, incl | 380 | 205 | 10 |
| Over 9.5 to 12, incl | 345 | 195 | 12 | ||
| Over12 to 80, incl | 275 | 115 | 20 | ||
| H04 | Shapes | All sizes | (As agreed upon between the manufacturer or supplier and the purchaser) | ||
Flange Type: Threaded Flange
The threaded flange manufactured in accordance with ASME B16.5 is similar to the slip on flange, but the bore shall have a taper pipe thread conforming to ASME B1.20.1. The thread shall be concentric with the axis of the flange opening, and variations in alignment (perpendicular to the flange face) shall not exceed 5 mm per meter. Threaded flanges are available in sizes NPS 1/2 through NPS 24 for pressure ratings of Class 150, Class 300, Class 400, Class 600 and Class 900. Sizes for Class 1500 and Class 2500 are available from NPS 1/2 to NPS 2-1/2.
Class 150 threaded flanges are made without a counter bore. The threads shall be chamfered approximately to the major diameter of the thread at the back of the flange at an angle of approximately 45 degree with the axis of the thread. The chamfer shall be concentric with the thread and shall be included in the measurement of the thread length. Class 300 and higher pressure class flanges shall be made with a counter bore at the back of the flange. The threads shall be chamfered to the diameter of the counter bore at an angle of approximately 45 degree with the axis of the threads. The counter bore and chamfer shall be concentric with the thread.
Dimensions of ASME B16.5 Class 150 Threaded Flange
A typical drawing for Class 150 threaded flange with raised face (RF), ASME B16.5.
Both machine bolt with nuts and stud bolt with nuts can be applied to 150# threaded flange.
| NPS | D | G | X | K | n | d | l | L | h | Y | T |
| 1/2 | 90 | 34.9 | 30 | 60.3 | 4 | 5/8 | 1/2 | 55 | 16 | 14 | 9.6 |
| 3/4 | 100 | 42.9 | 38 | 69.9 | 4 | 5/8 | 1/2 | 65 | 16 | 14 | 11.2 |
| 1 | 110 | 50.8 | 49 | 79.4 | 4 | 5/8 | 1/2 | 65 | 17 | 16 | 12.7 |
| 1-1/4 | 115 | 63.5 | 59 | 88.9 | 4 | 5/8 | 1/2 | 70 | 21 | 19 | 14.3 |
| 1-1/2 | 125 | 73.0 | 65 | 98.4 | 4 | 5/8 | 1/2 | 70 | 22 | 21 | 15.9 |
| 2 | 150 | 92.1 | 78 | 120.7 | 4 | 3/4 | 5/8 | 85 | 25 | 24 | 17.5 |
| 2-1/2 | 180 | 104.8 | 90 | 139.7 | 4 | 3/4 | 5/8 | 90 | 29 | 27 | 20.7 |
| 3 | 190 | 127.0 | 108 | 152.4 | 4 | 3/4 | 5/8 | 90 | 30 | 29 | 22.3 |
| 3-1/2 | 215 | 139.7 | 122 | 177.8 | 8 | 3/4 | 5/8 | 90 | 32 | 30 | 22.3 |
| 4 | 230 | 157.2 | 135 | 190.5 | 8 | 3/4 | 5/8 | 90 | 33 | 32 | 22.3 |
| 5 | 255 | 185.7 | 164 | 215.9 | 8 | 7/8 | 3/4 | 95 | 36 | 35 | 22.3 |
| 6 | 280 | 215.9 | 192 | 241.3 | 8 | 7/8 | 3/4 | 100 | 40 | 38 | 23.9 |
| 8 | 345 | 269.9 | 246 | 298.5 | 8 | 7/8 | 3/4 | 110 | 44 | 43 | 27.0 |
| 10 | 405 | 323.8 | 305 | 362.0 | 12 | 1 | 7/8 | 115 | 49 | 48 | 28.6 |
| 12 | 485 | 381.0 | 365 | 431.8 | 12 | 1 | 7/8 | 120 | 56 | 54 | 30.2 |
| 14 | 535 | 412.8 | 400 | 476.3 | 12 | 1-1/8 | 1 | 135 | 57 | 56 | 33.4 |
| 16 | 595 | 469.9 | 457 | 539.8 | 16 | 1-1/8 | 1 | 135 | 64 | 62 | 35.0 |
| 18 | 635 | 533.4 | 505 | 577.9 | 16 | 1-1/4 | 1-1/8 | 145 | 68 | 67 | 38.1 |
| 20 | 700 | 584.2 | 559 | 635.0 | 20 | 1-1/4 | 1-1/8 | 160 | 73 | 71 | 41.3 |
| 22 | 750 | 641.4 | 610 | 692.2 | 20 | 1-3/8 | 1-1/4 | 170 | … | 78 | 44.5 |
| 24 | 815 | 692.2 | 663 | 749.3 | 20 | 1-3/8 | 1-1/4 | 170 | 83 | 81 | 46.1 |
General Note: All dimensions are in millimeters except that d and l are provided in inch. For all threaded flanges of class 150, t (height of raised face) =2mm.
Notes: D: outside diameter of flange; K: diameter of bolt circle; G: outside diameter of raised face; X: diameter of hub at base; n: number of bolts; d: diameter of bolt holes; l: diameter of bolts; L: length of stud bolts for 2 mm raised face; h: minimum thread length; Y: length through hub; T: minimum thickness of flange.
Contact Us at Any Time
