Home
>
PRODUCTS
>
Copper Nickel Flanges
>
|
| Place of Origin | China |
| Brand Name | Kasugai |
| Certification | ISO PED AD2000 |
| Model Number | C71500 ANSI B16.5/B16.47 WN |
| Document | Product Brochure PDF |
ASTM B151 C71500 ANSI B16.5/B16.47 Copper Nickel Weld Neck Flanges
Product Information
| Product Name | ASTM B151 C71500 ANSI B16.5/B16.47 Copper Nickel Weld Neck Flanges |
| Size Range | 1/2’ to 48” |
| Pressure Class | 150, 300, 400, 600, 900, 1500, 2500, |
| Thickness | Sch10S to Sch160 |
| Standards | ASME/ANSI B16.5/B16.47, JIS B2220 |
| Type | Weld Neck (WN) |
| Dimensions | ASME/ANSI B16.5/B16.47, Custom Drawings |
| Origin | China |
Standards & Materials: ASTM B151
Chemical Composition of ASTM B151 (%)
| UNS | C | Ni | Pb | Fe | Mn | Zn | P | S | C |
| C70600 | Remainder | 9.0-11.0 | 0.05 | 1.0-1.8 | 1.0 | 1.0 | |||
| C71500 | Remainder | 29.0-33.0 | 0.05 | 0.40-1.0 | 1.0 | 1.0 |
Mechanical Properties of ASTM B151 C71500
| Temper Code |
Dia. or Distance Between Parallel Surfaces (mm) |
Tensile Strength, min (MPa) | Yield Strength at 0.5%Extension Under Load, min (MPa) | Elongation in 4xDia or Thickness of Specimen, min (%) | |
| O60, M30 | Round, Hex and Octagonal rods and square bars | Up to 12, incl | 360 | 125 | 30 |
| Over 12 to 25, incl | 330 | 125 | 30 | ||
| Over 25 | 310 | 125 | 30 | ||
| H01 | Round, Hex and Octagonal rods and square bars | Up to 12, incl | 450 | 345 | 10 |
| Over 12 to 25, incl | 415 | 310 | 15 | ||
| Over 25 to 80, incl | 380 | 240 | 20 | ||
| Over 80 to 125, incl | 310 | 125 | 20 | ||
| H04 | Up to 12, incl | 550 | 415 | 8 | |
| Over 12 to 25, incl | 515 | 400 | 10 | ||
| Over 25 to 50, incl | 485 | 380 | 10 | ||
| O60 | Rectangular bars and shapes | All sizes | 310 | 105 | 30 |
| H04 | Rectangular bars | Up to 12, incl | 515 | 380 | 7 |
| Over 12 to 25, incl | 485 | 345 | 10 | ||
| H04 | Shapes | All sizes | (As agreed upon between the manufacturer or supplier and the purchaser) | ||
Flange Type: Weld Neck (WN)
A weld neck flange, also called a tapered hub flange or high-hub flange, is a kind of flange that can relocate stress to the pipes, ensuring a decrease in high-stress concentration at the bottom of the flange. There are two welding neck flanges designs – the first type is used with pipes while the second, longer type cannot be used with pipes but with a process plant. The weld neck flange comprises of a round fitting that extends beyond the rim of the circumference. These flanges, typically manufactured from forging, are actually welded to pipes.
Long Weld Neck Flanges (LWN)
This flange type is regarded as high-hub flanges, which were created so stress could be transferred to the pipe and decreasing the stress concentration at the bottom of the flange.
The long welding neck flange is mainly applied to the construction of pressure vessel functioning as a nozzle (such as a thermowell nozzle). To attach a common welding neck flange to a pressure vessel, a piece of pipe is required with additional welding. A LWN flange on the other hand attaches directly to the vessel, hence, it can be viewed as an integrally reinforced nozzle. It avoids making a weld seam at pipe to flange and provides self-reinforcement.
Reducing Weld Neck Flange
It is also called reducing welding neck flange, because the flange neck has a reducing diameter that to weld to a smaller diameter pipe.
The reducing weld neck flange is used to make a reduction in the diameter of the pipe. A reducing flanged joint consists of a reducing flange and a standard flange, functioning like a reducer fitting. As illustrated in Figure-1, the larger end of reducing flange A, which is in contact with the standard flange B, is known as “the size from which the reduction is being made”; the smaller end of the reducing flange A, which will be welded to a pipe, is known as “the size to which the reduction is being made”. The flow should travel from the smaller size to the larger. If the flow direction were reversed, severe turbulence could develop.
In order to make a reduction in the pipe line with two standard welding neck flanges, an additional reducer shall be used as illustrated in Figure-2. The overall length of this configuration is 2L+H, which is much longer than L+M of a reducing flanged joint as illustrated in Figure-1. It means that the use of reducing flanges can effectively save space in crowed situation. In fact, the reducing flange is most frequently used in installations with limited space.
Contact Us at Any Time
