C70600 Copper Nickel Fittings ASME B16.9 16 Inch Pipe End Cap ASTM B122

ASTM B122 C70600 ASMEB16.9 Copper Nickle End Cap

Product Information

ASTM B122 C70600 Chemical Composition (%)

^A Copper plus elements with specific limits, 99.5 % min.

^B When the product is for subsequent welding applications and so specified by the purchaser, zinc shall be 0.50 % max, lead 0.02 % max, phosphorus 0.02 % max, sulfur 0.02 % max, and carbon 0.05 % max.

ASTM B122 C70600 Mechanical Properties

NOTE 1—Plate is generally available in only the as hot–rolled (M20) tempers. Required properties for other tempers shall be agreed upon between manufacturer and purchaser at the time of placing the order.

^B See Appendix X1.

^C Rockwell hardness values apply as follows: The B and G scale hardness values apply to metal 0.020 in. (0.508 mm) and over in thickness, and the 30-T scale hardness values apply to metal 0.012 in. (0.305 mm) and over in thickness.

^D Standard designation defined in Practice B 601

ASME B16.9 End Cap Dimensions (mm)

The cap is used to seal an open end of the pipe. In piping engineering, the cap made in accordance with ASME B16.9 will be welded to the end and need not be included in the length dimension of the run of pipe.

*NPS: Nominal Pipe Size; E⁽¹⁾: Length; E₁⁽²⁾: Limiting Wall Thickness for Length; E⁽²⁾: Length

NOTES:
(1) Length E applies for thickness not exceeding that given in column “Limiting Wall Thickness for Length, E⁽¹⁾.”
(2) Length E⁽²⁾ applies for thickness greater than that given in column “Limiting Wall Thickness for Length, E” for NPS 24 and smaller. For NPS 26 and larger, length E shall be by agreement between the manufacturer and purchaser.