CARBON STEEL REDUCED TEE ASTM A234 WPB

ASTM A234 WPB B16.9 Carbon Steel Equal Tee
 
The ASTM A234 WPB Tee are carbon steel pipe tees that have the capacity to connect three pipes or other fittings.
A carbon steel equal tee is a type of pipe fitting used to connect three pipes at a single point, forming a T-shaped configuration.
- The equal tee is made from carbon steel, typically conforming to standards such as ASTM A234 WPB or ASME B16.9.
- Carbon steel provides high strength, durability, and corrosion resistance.
 
Product Information

 
Applications:
- Carbon steel equal tees are widely used in various industrial and commercial piping systems, such as:
- Oil and gas pipelines
- Chemical processing plants
- Power generation facilities
- HVAC systems
- Water and wastewater treatment plants
 
ASTM A234 WPB Equal Tee Dimensions

 

 
 
ASTM A234 WPB Chemical Compositions (%)

*For ASTM A234 Gr. WPB, the carbon equivalent (C.E.), based on heat analysis and the following formula, shall be no greater than 0.50. C.E. = C + Mn / 6 + (Cr + Mo + V) / 5 + (Ni + Cu) / 15. The C.E. values shall be reported on the test report.
*ASTM A234 WPB fittings made from bar or plate may have 0.35 max carbon and that made from forgings may have 0.35 max carbon and 0.35 max silicon with no minimum.
*For each reduction of 0.01% below the specified carbon maximum, an increase of 0.06% manganese above the specified maximum will be permitted, up to a maximum of 1.65%.
*The sum of copper, nickel, chromium, and molybdenum shall not exceed 1.00%