|
| Place of Origin | China |
| Brand Name | Kasugai |
| Model Number | ASTM A234 WPB B16.9 Equal Tee |
| Document | Product Brochure PDF |
ASTM A234 WPB B16.9 Carbon Steel Equal Tee
The ASTM A234 WPB Tee are carbon steel pipe tees that have the capacity to connect three pipes or other fittings.
Carbon steel fittings are a commonly used type of pipe fitting in a wide range of piping systems.
Carbon steel has excellent mechanical properties, allowing it to withstand high pressure and loads. This makes carbon steel fittings suitable for use in various industrial applications such as oil and gas, power, and machinery.
Carbon steel fittings undergo special manufacturing processes, with the surface galvanized or painted, to effectively resist general chemical corrosion and oxidation.
Carbon steel fittings have a wide operating temperature range, able to withstand temperatures from -20°C to 500°C, meeting the requirements of various high-temperature applications.
Product Information
| Product Name | ASTM A234 WPB B16.9 Carbon Steel Equal Tee |
| Size Range | 1/2” to 48” |
| Wall Thickness | Sch20S to Sch80S |
| Standards | ASTM A234 |
| Grade | WPB |
| Manufacturing Standards | ASME B16.9 |
| Coating | Black primer coating, hot dipped galvanization, zinc flake coating (electro-galvanization), rust inhibition oil or varnish coating. |
ASTM A234 WPB Equal Tee Dimensions
| NPS (Inch) | Outside Dia. at Bevel | Center-to-End | |
| O.D. | Run (C) | Outlet (M) | |
| 1/2 | 21.3 | 25 | 25 |
| 3/4 | 26.7 | 29 | 29 |
| 1 | 33.4 | 38 | 38 |
| 1 1/4 | 42.2 | 48 | 48 |
| 1 1/2 | 48.3 | 57 | 57 |
| 2 | 60.3 | 64 | 64 |
| 2 1/2 | 73 | 76 | 76 |
| 3 | 88.9 | 86 | 86 |
| 3 1/2 | 101.6 | 95 | 95 |
| 4 | 114.3 | 105 | 105 |
| 5 | 141.3 | 124 | 124 |
| 6 | 168.3 | 143 | 143 |
| 8 | 219.1 | 178 | 178 |
| 10 | 273.1 | 216 | 216 |
| 12 | 323.9 | 254 | 254 |
| 14 | 355.6 | 279 | 279 |
| 16 | 406.4 | 305 | 305 |
| 18 | 457.2 | 343 | 343 |
| 20 | 508 | 381 | 381 |
| 22 | 559 | 419 | 419 |
| 24 | 610 | 432 | 432 |
| 26 | 660 | 495 | 495 |
| 28 | 711 | 521 | 521 |
| 30 | 762 | 559 | 559 |
| 32 | 813 | 597 | 597 |
| 34 | 864 | 635 | 635 |
| 36 | 914 | 673 | 673 |
| 38 | 965 | 711 | 711 |
| 40 | 1016 | 749 | 749 |
| 42 | 1067 | 762 | 711 |
| 44 | 1118 | 813 | 762 |
| 46 | 1168 | 851 | 800 |
| 48 | 1219 | 889 | 838 |
ASTM A234 WPB Chemical Compositions (%)
| Grade | C | Mn | P | S | Si | Cr | Mo | Ni | Cu | V |
| WPB | ≤0.30 | 0.29-1.60 | ≤0.050 | ≤0.058 | ≥0.10 | ≤0.40 | ≤0.15 | ≤0.40 | ≤0.40 | ≤0.08 |
*For ASTM A234 Gr. WPB, the carbon equivalent (C.E.), based on heat analysis and the following formula, shall be no greater than 0.50. C.E. = C + Mn / 6 + (Cr + Mo + V) / 5 + (Ni + Cu) / 15. The C.E. values shall be reported on the test report.
*ASTM A234 WPB fittings made from bar or plate may have 0.35 max carbon and that made from forgings may have 0.35 max carbon and 0.35 max silicon with no minimum.
*For each reduction of 0.01% below the specified carbon maximum, an increase of 0.06% manganese above the specified maximum will be permitted, up to a maximum of 1.65%.
*The sum of copper, nickel, chromium, and molybdenum shall not exceed 1.00%
Contact Us at Any Time
